Multilinear Commutators of θ-Type Calderón-Zygmund Operators on Non-Homogeneous Metric Measure Spaces

In this paper, the boundedness in Lebesgue spaces of commutators and multilinear commutators generated by θ-type Calderón-Zygmund operators with RB MO(μ) functions on non-homogeneous metric measure spaces is obtained.     

新型各向异性核工业石墨断裂力学行为的实验研究和数值分析

本文分别采用激光和白光DSCM(数字散斑相关测量)方法对一种新型各向异性核工业石墨的裂纹尖端位移、应变场进行了实验研究，两种方法都取得了较好的结果。考虑核工业石墨制备过程形成的各向异性特点，本文构建了三维各向异性有限元模型，采用奇异单元，计算模拟石墨裂纹尖端的变形和应力场，通过对实验结果和有限元计算结果的比较可以发现两者具有相近的趋势。     

临界空穴扩张比准则的适用性

用新研制成的DE36平台钢制的轴对称和平面应变试样,进一步考察了临界空穴扩张比V_(Gi)准则[1]、[2]、[3]的适用性。实验和大应变有限元理论计算结果表明,V_(Gi)准则适用于所研究材料。文中指出,按V_(Gi)准则可根据试样或构件材料中V_G的发展变化来预起裂位置。     

Fast Separation Method Development for Supercritical Fluid Chromatography Using an Autoblending Protocol

Supercritical fluid chromatography (SFC) is a powerful separation technique particularly in the area of enantioseparations. With rapid analysis speed, wide polarity compatibility, higher column efficiency and lower cost of the mobile phase, SFC is regarded as a better choice than high-performance liquid chromatography for drug discovery. In the development of separation method, the choice of modifier and/or additive is the key point of optimum separation. However, such screening of SFC is typically time-consuming. In this study, an autoblending protocol was introduced to speed up the modifier and/or additive screening process, which was performed on a separate programmable gradient proportioning system. The protocol prepares mobile phases on the fly to speed up the screening of modifiers and/or additives and reduces the waste of solutions. Furthermore, by switching mobile phase in the same run, separation of different types of compounds could also be achieved. This system was successfully applied to screen modifier–additive combinations of three alkaloids and three polyphenols by switching to two mobile phase conditions, as well as by a ternary additive mobile phase on an SFC system. The proposed protocol allows fast separation method development of SFC, which was proved to be rapid, simple, and reproducible.     

堆积的胸腺嘧啶体系光物理失活的动力学模拟

采用半经典动力学方法模拟了π堆积的胸腺嘧啶体系最低激发态的光物理失活过程.设置激光脉冲仅作用于一个胸腺嘧啶分子T,另一胸腺嘧啶分子T’保持基态.模拟发现由于T与T’之间存在π堆积相互作用,导致电荷转移,形成T带负电荷、T’带正电符的激基复合物.由于相邻分子的空间效应阻碍了激发的T分子到达圆锥相交所必需的强烈扭曲,激基复合物的寿命比单体增长.当分子间距离缩短至0.3 nm后,T分子C₅—C₆键扭曲程度最大,此时发生电荷重组,两个胸腺嘧啶分子均恢复电中性.电荷重组诱导T’分子发生畸变,并在C₅’—C₆’扭曲最大时避免相交,体系衰减至基态,T和T’分子均恢复平面构型.     

Palladium-catalyzed Coupling between Aryl Halides and Trimethylsilylacetylene Assisted by Dimethylaminotrimethyltin

Palladium‐catalyzed coupling between aryl halides, especially less reactive ones or N‐heteroaryls, and trimethylsilylacetylene in the presence of dimethylaminotrimethyltin generated the coupled products in high yields. The reaction does not need CuI and base as auxiliary agents.     

PFOS对哈维氏弧菌生长及外毒素基因的影响

探讨了全氟辛烷磺酸盐(PROS)对哈维氏弧菌密度及外毒素基因表达的影响.用含有不同浓度PFOS(5、50、500 mmol/L)的培养基培养哈维氏弧菌,分别在6、15、24 h取适量菌液,经4 000 r/min离心,磷酸盐缓冲液(PBS)洗涤3次,制成PBS菌悬液.采用实时荧光定量PCR检测其胞外蛋白酶、溶血素及保守...     

Physicochemical properties, in vitro antioxidant activities and inhibitory potential against α-glucosidase of polysaccharides from Ampelopsis grossedentata leaves and stems

In the present study, polysaccharides named ALPS and ASPS were isolated from Ampelopsis grossedentata leaves and stems, respectively. Physicochemical properties, in vitro antioxidant activities and the inhibitory effects on α-glucosidase of ALPS and ASPS were investigated. It was found that both ALPS and ASPS were acid protein-bound heteropolysaccharides, although with considerably different chemical composition and molecular weight distribution. Meanwhile, in comparison with ALPS, ASPS exhibited stronger antioxidant activity and inhibitory potential against α-glucosidase according to the in vitro evaluation. Moreover, our results suggested that protein and uronic acid might, at least partly, contribute positively to the biological behavior of ALPS and ASPS.     

CeO_2修饰炭载体负载PdPt二元合金催化剂及其在甲酸氧化电催化中的应用

用CeO2修饰炭粉做载体,使用有机溶胶法还原PdPt二元合金的方法制备了一系列PdPt/CeO2-C催化剂.借助电化学测试,探讨催化剂中不同Pd与Pt原子比例的PdPt二元合金和不同含量的CeO2对于甲酸电氧化催化活性的影响.不断减少PdPt合金中Pt的比例可以促使甲酸氧化的起始电位前移,当Pd：Pt=15：1时氧化电流出现极值;同时,随着催化剂中CeO2含量的增加,催化剂对于HCOOH氧化的电流密度增加,当含量为15%时达到最大值.相对于Pd/C催化剂,在Pd15Pt1/15CeO2-C催化剂表面的甲酸氧化反应起始电位负移至少0.1V,氧化的电流密度提高60%以上.结合X射线衍射（XRD）,X射线光电子能谱（XPS）,透射电镜（TEM）和热重（TG）等测试数据可以发现,当极少量的Pt与Pd形成合金,Pt与Pd之间产生电子效应,使得合金表面HCOOH氧化的过电位降低;而CeO2的添加不仅有助于PdPt二元合金的分散,更有可能改变甲酸在PdPt表面的氧化反应路径,发挥双功能机理.     

撞击载荷下Nomex蜂窝夹芯梁的变形模式研究

本文研究了Nomex蜂窝夹芯结构在不同冲量下的变形模式和失效模式.实验采用子弹撞击的加载方式,对Nomex蜂窝夹芯梁施加大小不同的冲量,使用激光位移传感器测量每个试件后蒙皮的变形位移.分析了同芯层厚度,不同蒙皮厚度的Nomex蜂窝夹芯梁在不同冲量作用下抵抗变形的能力,以及冲量大小与蒙皮厚度对夹芯梁抵抗撞击能力的影响,计算分析了蒙皮与芯层的吸能性.实验结果表明:增加蒙皮的厚度能够改善夹芯梁在撞击荷载下抵抗变形的能力,在撞击过程中芯层吸收了50％左右的能量,且冲量越大,芯层吸收的能量越多.